Three original SSSTS toolbox talk rehearsal examples Version 1.4 - 12 November 2026 Use alongside your trainer’s instructions and current course material. These are fictional learning examples, not official CITB scripts. The online page contains the illustrations. Their text descriptions are included here so the examples also work as reading and rehearsal notes. An annotated example: a blocked pedestrian route This fictional learning example concerns workers walking from a pedestrian entrance towards a welfare building beside a delivery area. The established pedestrian route is separated from vehicle movements. Materials have obstructed it. No alternative route is authorised in this example. The aim is to explain the existing arrangement and the response to a failure, not to design a traffic system. Real sites should plan to avoid reversing where possible and keep pedestrians and vehicles separated. The practical guidance here is for Great Britain; Northern Ireland has separate legislation. View the illustration: https://www.ssstscourse.com/blog/sssts-toolbox-talk#worked-toolbox-talk-example Diagram in words: the pedestrian entrance leads towards the welfare building within a separated pedestrian area. Stored materials obstruct that route. The adjacent vehicle area is not an authorised alternative. Prevent the affected unsafe movement, report the obstruction through the site arrangements and wait for the planned route to be restored or an alternative to be assessed and authorised. The completed plan Audience and outcome: Workers using this fictional entrance. They should identify the planned route, explain why the obstruction matters and describe what they would do next. Hazard and controls: People could enter moving or reversing vehicles' operating space. Keep the planned separation, maintain a clear walkway and use the site's reporting and restart arrangements when it is obstructed. Reporting contact in this example: Sam, the fictional delivery coordinator, is the first reporting contact. In a real talk, replace that name with the confirmed person's role and the actual contact method. Understanding check: Ask a listener to trace the pedestrian route on the drawing, identify where they would stop using it and explain whom they would contact. No one enters a live vehicle area for the demonstration. Follow-up: Confirm that the obstruction is resolved or an assessed alternative is authorised, then communicate the arrangement before affected movement resumes. A five-minute rehearsal outline The timings below are suggested rehearsal segments, not official sub-scores or fixed CITB time limits. Allow the audience time to answer rather than filling every second with your own words. 1. 0:00–0:40 - Establish the situation (40 seconds) “This talk is for people walking from our pedestrian entrance to the welfare building. Materials are blocking the route shown here. The delivery area is beside it, so walking around the blockage could put you into vehicle movements.” Why this helps: the audience knows which task and changed condition you mean. 2. 0:40–2:30 - Explain three points (1 min 50 sec) “First, use the planned pedestrian route and keep outside the vehicle area. Second, keep that route clear: do not leave materials on it. Third, if it is blocked, do not squeeze past or invent a diversion. Stop using the affected route and report it to Sam, our delivery coordinator in this exercise. The affected unsafe movement stays paused until the route is restored or an alternative is assessed and authorised.” Why this helps: each point describes an action, and the final point explains what happens when the usual control fails. 3. 2:30–4:15 - Ask and listen (1 min 45 sec) “Using the drawing, what would you do if you reached this obstruction?” Listen for stopping short of the problem, reporting it and avoiding the vehicle area. Then ask: “What needs to be confirmed before people use the route again?” Listen for a restored route or an assessed, authorised alternative that has been communicated. Why this helps: the answers show the listener's decision. If someone suggests walking behind the vehicle, revisit the separation principle before continuing. 4. 4:15–5:00 - Recap and close the loop (45 seconds) “Use the planned route, keep it clear and report a blockage instead of improvising. Sam will coordinate the response in this example. Is there anything about the route or reporting arrangement we have not made clear?” Record an unanswered concern and say who will check it and how the answer will be shared. Why this helps: the close repeats the action and gives uncertainty somewhere to go. The talk does not make a learner a vehicle signaller. Only trained and authorised people should direct movements. High-visibility clothing, eye contact or a reversing alarm does not replace a planned safe arrangement. Revise the traffic-management principles if you cannot explain why the controls matter. Change a vague reminder into a useful message Weak: “Wear your high-vis, watch the traffic and be careful.” This gives no route, no changed condition and no clear response. Better: “The walkway to the welfare building is blocked. Do not divert into the vehicle area. Stop using the affected route and tell the agreed contact; wait for the route to be restored or an assessed alternative to be authorised. Show me where the problem is on this drawing and explain your next action.” Before adapting this example, verify the actual route, control arrangements, audience, contact method and authority for restarting. Do not transfer the fictional coordinator or drawing into a real briefing as though they were site facts. Worked example: dust controls before cutting starts Audience: a block-cutting team and workers sharing its area. Outcome: they can explain why controlling dust at source, protecting nearby people and using the assessed cleaning method all matter. The following is an original rehearsal example for a fictional task; replace the work details with the arrangements you have checked. Opening: make the risk understandable “Today we are discussing the dust from cutting blocks. The risk is not limited to the person holding the tool. People working nearby and those cleaning afterwards can also breathe it. Some construction dust is fine enough to be difficult to see, and repeated exposure can damage health. A clear-looking room is not our test of whether the controls work.” Speaker note: explain the exposure before listing equipment. Use the task's material information; do not claim that every dust has the same composition or health effect. Assess, control and review the exposure from the actual task. Three points to explain 1. Reduce the dust-producing work. “Our first question is whether the cut can be avoided by using the right-size material or changing preparation. Where cutting is required, use the method and controls agreed for this material and tool. Moving a dusty task outdoors does not automatically make exposure acceptable.” 2. Check the whole control arrangement. “For this fictional task, the method specifies on-tool extraction. Check the intended arrangement before starting and report a missing connection, damaged hose or ineffective control. Keep other people out of the affected work area under the agreed arrangements. A mask does not fix an absent source control; any required respiratory protection has its own selection, fit and use requirements.” 3. Include cleaning and changes. “Follow the assessed cleaning method. Dry sweeping can put settled dust back into the air. A different tool, material, work area or nearby trade can change the exposure, so get the arrangements reviewed rather than carrying on with yesterday's assumptions.” Speaker note: point to the relevant task information or a safe photograph of the specified equipment. Do not run a tool to create a dust demonstration. Consider substances generated by the work, everyone who could be exposed, the controls needed and when those arrangements need reviewing. Ask the audience, then compare the reasoning “The extraction has not arrived, but everyone has a mask. Can this task start?” Answer to listen for: the specified control is missing, so the affected cutting stays paused until it is provided and checked or an appropriate alternative is assessed. “Everyone has a mask” does not establish adequate control of the task or protection of other people. “The cutting is finished. What still needs controlling?” Answer to listen for: exposure during cleaning and handling dusty material, other workers using the area, and the condition of equipment for its next use. Completing the cut does not remove settled dust or finish the planned housekeeping. Close with a specific check-back “Before this task starts, show me which method we are using, the control we need and how you report a problem. If any of those is unclear, we resolve it before the cut. Afterwards, use the planned cleaning method.” Record a genuine question and its owner; for example, “Which cleaning equipment is specified for this area?” Keep it open until the answer has been checked and shared. Rehearsal tip: allow the audience to explain both answers. If the talk is running long, shorten the scene-setting rather than reading out the answers yourself. Practise it aloud against your trainer's timing instructions. Worked example: checking a stepladder before use Audience: workers using stepladders for an already assessed task. Outcome: they can identify the pre-use checks, distinguish condition from suitability and explain what to do with a defect. Use an image or a safely positioned, unused example for the talk; nobody needs to climb it. Opening: two different questions “Before using this stepladder, we need to know that it is suitable for the planned work and that its condition is satisfactory. Those are different questions. A brand-new ladder can be the wrong equipment for a task. A suitable type can still have damaged feet, a loose step or a faulty locking mechanism.” Speaker note: the task's equipment choice must already have been assessed. This short talk teaches recognition and reporting; it does not select a ladder for every job. Use the actual manufacturer's pre-use instructions and the site arrangements. Three points to explain 1. Check before use and after a relevant change. “The person using the equipment checks it at the beginning of the working day and after something happens that could affect it, such as a drop or moving it from dirty ground to a clean surface. An earlier inspection does not tell us what happened since.” 2. Look at the parts people depend on. “Look for damaged side rails, missing or worn feet, loose or damaged steps, contamination, a damaged platform and locking parts that do not function correctly. Use the manufacturer's instructions for this model. A label showing an inspection date does not remove the need to notice a new defect.” 3. Deal with the defect and the task separately. “If you find a defect, do not use the stepladder. Tell the person in charge and follow the site's arrangements to prevent its reuse. Do not make a temporary repair. If another item is proposed, its suitability and condition still need checking; availability alone is not a selection decision.” Use a visual question Use the close-up illustration below to ask the team what they can actually observe. “The anti-slip foot on this leg is missing” is a useful description. “It looks a bit unsafe” makes the follow-up less clear. Then ask what they would do before anyone uses the stepladder. Illustration in words: Two close-up drawings show the bottom of a ladder leg. The left leg has a fitted anti-slip foot. The right leg ends in bare metal because its foot is missing. Do not use the defective stepladder. Prevent its use and report the defect through the site arrangements. A fitted foot alone does not establish that a ladder is safe. View the illustration: https://www.ssstscourse.com/blog/sssts-toolbox-talk#ladder-toolbox-talk-example “The inspection label is current. Does that change the response to the missing foot?” Answer to listen for: no. The visible defect is information about its condition now. Prevent use and report it. A dated inspection cannot make a missing component reappear. “Can we borrow a longer ladder and finish the task?” Answer to listen for: first check whether the proposed equipment and method suit the actual work. Changing the equipment can change access, stability and how the task is done. It is not enough to find something else that reaches the work. Close and record the learning “Show me what you would check before use, how you would describe a defect and who receives the report. Use the agreed equipment; report a change before improvising.” A useful rehearsal note might say: “The learner named the damaged foot but assumed the inspection label overrode it. We clarified the difference between a previous record and present condition; their second explanation identified both.” Keep wider equipment-choice questions connected to the specific pre-use message, without trying to teach every access system in one short talk.