A construction site supervisor turns agreed arrangements into day-to-day work: prepare the team, explain the controls, check what is happening and raise problems before they become accepted shortcuts. The role also includes recording unresolved actions and handing them over clearly.
Your authority depends on the actual assignment, competence and site arrangements. A job title or SSSTS certificate does not automatically authorise specialist design, lift planning or statutory inspection sign-off. Use this daily guide to organise checks and conversations within your role.
This guide uses the Great Britain CDM 2015 framework; Northern Ireland has its separate CDM 2016 framework. All dialogues and completed log entries below are fictional learning examples. The worksheets are original aids, not prescribed legal records or approved site procedures.
Use the daily supervisor record
In this guide
Understand the supervisor's role
Good supervision depends on clear expectations, knowledge of risks and controls, and checks that people understand and use the arrangements. Establish what you may decide, what needs approval and who is available when the plan no longer fits.
Under the Great Britain CDM framework, dutyholders are identified by their actual role and responsibilities. The worker role can include foremen and chargehands. “Site supervisor” or “site manager” alone does not establish who is the contractor, principal contractor or designer.
Scroll sideways to compare all columns. Keyboard: focus the table and use the arrow keys.
| Role or arrangement | Typical focus | Boundary to confirm |
|---|---|---|
| Frontline supervisor | Brief assigned work, coordinate the team, observe controls, record changes and raise concerns. | Which decisions are delegated, what must pause and who reviews matters outside that authority? |
| Management and relevant contractor/dutyholder | Arrange resources, planning, coordination and appropriate supervision within the organisation's responsibilities. | Which organisation or appointed person owns the decision? Delegating a check does not erase the dutyholder's responsibility. |
| Competent specialist or appointed technical role | Provide the design, planning, inspection or technical judgement appropriate to the task and appointment. | Has the changed information reached that person, and are the limits of their appointment understood? |
This is not an exhaustive legal allocation. One person can hold more than one role, but the competence and appointment must be established. Contractors and principal contractors have distinct responsibilities.
Recognise when specialist review is needed
A changed lifting arrangement needs the appropriate competent lifting review . Suspected loss of excavation support or changed ground conditions require the relevant excavation safety arrangements . Missing temporary-works design information is not a reason to improvise a support detail. Keep affected work controlled and refer the issue through the agreed route; do not sign beyond your competence.
Before the shift starts
Ask what has changed since the last briefing, not just whether a document is present. Assessments, plans and method statements need to support the actual work. A supervisor may contribute to, brief and check arrangements without personally writing every risk assessment.
- Work: confirm the task, sequence and limits of today's activity.
- Changes: review weather, ground, access, services and information received since the previous shift.
- People: identify unfamiliar workers, relevant competence and induction or supervision needs.
- Interfaces: check adjacent trades, deliveries, occupied areas and public access.
- Controls: confirm the applicable method, equipment, barriers, welfare and emergency arrangements are available and suitable.
- Decisions: identify who resolves an unanswered question and what cannot proceed meanwhile.
Brief the work and check understanding
Explain the important controls, including what to do if they fail. Ask people to describe the next action in their own words or point it out on a safe diagram. Use the RAMS briefing checklist for the task discussion and the site induction checklist for new arrivals; a task briefing does not replace induction.
“Everyone signed” is not the same as “everyone can explain the work safely”. Give people relevant local information that they can understand. Resolve uncertainty before the affected activity starts.
During the work
Observe what people are actually doing and whether the controls still work. A satisfactory pre-start check does not settle the rest of the shift. Check their continuing effectiveness and correct use, and act on concerns.
Check changed sequences, equipment availability and interactions with other work. Ordinary supervisory observations do not replace formal inspections or examinations requiring a specified competent person. The relevant activity and equipment determine those requirements, not a universal daily tick-sheet interval.
Record an action with a test for closure
Record the fact observed, immediate protection, owner, due point and what will prove the issue is resolved. “Photo uploaded” or “manager informed” may record a step, but neither necessarily shows that the control now works. The inspection action register can hold detailed follow-up; this guide's log supports the daily handover.
Fictional action A01: from open to verified
08:10, open: stored materials obstruct the existing pedestrian route beside a delivery area. The affected movement is paused under the site arrangements; no diversion into vehicle movements is authorised. The logistics lead owns restoring the route, with a due point of before it is used again.
09:05, verification: the obstruction has been removed. The responsible site coordinator checks the restored route and existing separation, confirms the arrangement for use and authorises the affected movement to resume. The supervisor checks that the team knows the route and reporting contact, then records who verified it and when.
Closed: only after those checks and communication are recorded. A photograph can support the record; it is not the authorisation or the whole verification.
The example shows the importance of separating pedestrians from vehicle movements. A due time never gives permission to continue unsafe work while waiting for an action owner.
When something goes wrong or changes
Use the site's authority and emergency arrangements . Do not delay moving away from immediate danger while waiting for an administrative approval. The following is a general decision sequence, not a universal emergency contact chain.
Recognise the change or danger
Identify what no longer matches the agreed arrangement: a damaged access route, unexpected service, missing control or changed load information.
Protect people and pause affected work as necessary
Take appropriate action within your competence, warn affected people and prevent further exposure. If it is an emergency, use the site's emergency procedure immediately. Do not approach a hazard merely to take a photograph.
Escalate the actual facts
Tell the person who controls or can resolve the work what changed, where, who may be affected and what has been paused. Obtain competent review rather than guessing a technical solution.
Check the revised or restored arrangement before restart
Confirm the necessary review, functioning controls and communication to affected people. Follow the site's restart authority. Keep unresolved restrictions in the handover; an assigned action or elapsed deadline is not a restart decision.
Report near misses and learn from them
Use factual local reporting and preserve relevant evidence safely. Record what happened and the conditions, without inventing motives or blaming someone before the issue is understood. A near-miss reporting example can help organise the account.
Local reporting is different from deciding whether an event is reportable under RIDDOR. Some dangerous occurrences are reportable, but not every near miss is. Check who is responsible for reporting under the Great Britain rules; a supervisor's job title alone does not decide that statutory role.
For issues that need coordination across contractors, use the site manager responsibilities and planning guide to identify the decision owner, current restriction and evidence needed for the next step.
Safety conversations and leadership
Protect people first, then ask what the worker is trying to do, what could harm someone, which control is intended and what support is missing. Listen to the answer and agree a safe next action. Give people space to raise concerns and contribute to the discussion.
Fictional dialogue 1: a rushed shortcut
Worker: “The extraction unit is being used elsewhere. It's only two cuts; I'll get them done now.”
Supervisor: “Pause the cutting. The planned dust control is missing. What is preventing you from following the agreed method?”
Worker: “We are behind, and the equipment has not arrived.”
Supervisor: “I will raise the equipment and sequence problem with the person coordinating the work. We need a suitable control arrangement confirmed and checked before this task resumes. What will you do while that is unresolved?”
Worker: “Keep this task paused and check with you before restarting.”
Reflect: the supervisor addresses the missing resource as well as the proposed shortcut. They do not replace the planned control with an improvised mask instruction. Control exposure through suitable arrangements; do not assume a short task is harmless.
Fictional dialogue 2: a new worker is unsure
Worker: “I signed the briefing, but I am not sure which access route you meant.”
Supervisor: “Thank you for saying so. Do not start that activity until we have made the route clear. Let's use the site drawing and check what needs explaining.”
Worker: “Some of the words were unfamiliar.”
Supervisor: “We will use clear wording and arrange suitable language support where needed. Then show me the route on the drawing and explain what you would do if the barrier or route changed.”
Worker: “I use the confirmed route. If it is blocked or changed, I stop and report it rather than choose another way.”
Reflect: the question reveals an information gap that a signature did not resolve. Check understanding before the affected work, then follow up during the task. Use a safe drawing or demonstration rather than putting the person into a hazard to test them.
Handle disagreement and communication needs
Explain the specific concern without public embarrassment. If a worker disagrees, listen for missing information or a practical constraint; keep necessary protection in place while the competent person resolves an outstanding safety question. A useful conversation ends with an action and a check, not merely agreement to “be careful”.
Workplace briefings need to be understood. Appropriate interpreting, checked translations, clear language and visuals can help. Choose support suited to the risk and verify understanding; a nod or an automated translation alone is insufficient. These workplace arrangements are separate from CITB's course-assessment language rules.
Carry concerns into site induction, near-miss learning and operational toolbox talks where relevant, then tell workers what changed in response.
End the shift and hand over clearly
Identify unfinished work, isolated or restricted areas, changed controls and actions still awaiting a decision. Name the receiving responsible person and confirm they understand what must remain paused. A message buried in a group chat does not establish that a critical restriction has been received.
Where your delegated responsibilities include shared equipment, keep custody and unresolved storage concerns clear at handover. The tool theft evidence and inventory includes an original record and end-of-day prompts; it does not replace equipment inspections or specialist security advice.
Fictional action B02: still open at handover
The planned lift cannot proceed because the supplied load information differs from the information used in planning. The affected lift remains paused. The person responsible for competent lift planning owns the clarification; the due point is before that lift.
At handover, the outgoing supervisor records that review is still outstanding, identifies the restriction and discusses it with the incoming responsible person. The entry stays open. The next shift's arrival or an optimistic completion time does not authorise the lift.
Blank daily action and handover record
Scroll sideways to compare all columns. Keyboard: focus the table and use the arrow keys.
| Field | Record |
|---|---|
| Date, shift, area, task and reference | ________________ |
| Changes, checks and briefing/understanding evidence | ________________ |
| Fact observed and people/work affected | ________________ |
| Immediate protection and restrictions | ________________ |
| Action, owner and due point | ________________ |
| Status: open, awaiting review or verified closed | ________________ |
| Verification: what, who, when and restart authority | ________________ |
| Handover recipient, unresolved items and acknowledgement | ________________ |
Download the editable blank log and both fictional worked records. Use the optional editor below for one working entry, or print the blank record. Keep unnecessary personal, medical or identity information out of these notes.
Write a daily action and handover entry
Record facts and actual decisions, not assumptions that work is safe. Use the download or print controls to keep your entry; the static template download above does not contain these typed values.
Set the shift context
Record the issue and action
Verify and hand over
Develop the role without confusing training and authority
SSSTS training covers the health-and-safety knowledge behind supervision. Use the SSSTS revision guide to strengthen underlying knowledge. For how to become a site supervisor, discuss practical experience and qualification evidence with your employer and explore career routes in England. Keep site supervisor salary evidence separate from deciding what responsibilities you can safely accept.
Common site-supervisor duty questions
What are the main duties of a site supervisor?
Prepare and brief assigned work, coordinate the team, check actual controls, identify changes, raise concerns and hand over unresolved actions. The exact scope depends on the employer, project, delegation and the supervisor's competence; this guide is not a universal job specification.
What is the difference between a site supervisor and site manager?
Frontline supervision commonly focuses on the team's work and controls, while wider management covers coordination, resources and planning. Titles and responsibilities vary. Neither title alone establishes who legally holds contractor or principal-contractor duties, and one person may have several confirmed roles.
Does a supervisor write every risk assessment?
No universal rule assigns every assessment to the supervisor. A supervisor may contribute knowledge, brief the agreed arrangements and check their use. Preparation and review must be carried out through suitable competent arrangements for the task. A signed form does not prove that controls are understood or working.
Can a supervisor stop unsafe work?
Know the site's delegated authority and emergency arrangements. Take appropriate protective action, pause affected work as necessary and escalate the issue; do not delay moving away from immediate danger to obtain paperwork approval. A restart needs the required competent review, suitable controls and the site's authorisation process.
Does SSSTS make someone competent for every supervisory task?
No. Training contributes to skills, knowledge and experience; it does not automatically authorise specialist design, lift planning, technical work or inspection sign-off. Competence and authority must fit the actual task and appointment.
How should a supervisor challenge an unsafe shortcut?
Protect people first, explain the specific concern and ask what is preventing the agreed method. Address the missing control or resource, agree a safe next action and check the worker can explain it. The safety conversation examples show a factual, respectful approach without delaying necessary protection.
What should go in a daily supervisor log?
Record the work, changes, checks, facts observed, immediate protection, action owner, due point, status and verification. Include unresolved restrictions and who received the handover. Avoid unnecessary personal or medical information. The template is an original administrative aid, not a substitute for required specialist records.
How do I become a construction supervisor?
Routes can combine work experience, education or apprenticeships, relevant training and appropriate qualification evidence. Ask what the actual role requires and use how to become a site supervisor for that separate development task. A course certificate alone does not establish readiness for every responsibility.